| Customization: | Available |
|---|---|
| Application: | Industrial |
| Material: | Aluminum Alloy |
|
Still deciding? Get samples of US$ 0/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Many customers worry that aluminum profiles cannot be used to make photovoltaic brackets, and they are also worried that the photovoltaic brackets are not strong and cannot adapt to environmental requirements. The aluminum profile photovoltaic support must comply with the following technical requirements during the production process, which can meet the needs.
1. Qualified products. There are many profile manufacturers on the market now, and the products are also uneven. In order to have a good bearing capacity for photovoltaic brackets, it is necessary to ensure that the profiles used are qualified products, which can ensure that they are still bright after 30 years of use. It can be used even in high temperature or harsh environments.
2. Scientific angle design. The installation needs a certain angle, using a flexible hinge connection with 180 degrees otation matters a lot.
3. Right designed frame structure. The frame structure is related to the load-bearing and price of the photovoltaic support, so a reasonable frame structure can save the cost of the enterprise within the load-bearing range.
4. Build a smart wire layout. The wires used on the solar panel mount should be buried in the profile groove as much as possible to facilitate management and reduce leakage.
| Mount Type | Custimized mounting system |
| Standard | AS/NZS 1170 |
| Applicable Module | Framed or frameless panel |
| Roof clearance | Customized |
| Wind load | Up to130mph (60m/s) |
| Snow load | Up to 30psf (1.4KN/m2) |
| Width of solar module | 751 ≤ A ≤ 1313 mm |
| Thickness of solar module | 30-50 mm |
| Adjustable angle range | 15~50° |
| Material | Aluminum alloy 6063 T5 |
| Application | garden, balcony, railing, walls etc. |
| Warranty | 10 years |
A wide range of different packaging methods. Try to avoid unnecessary handling and ensure that the goods are delivered safe and undamaged. Examples of common methods of packaging are:
1. In a carton / with poly bag or PE film wrapped
2. Bundled / with polythene wrap
3. On a pallet/ with interleaving
4. By wooden rack or box
Our main facilities:
8 Aluminum profile extrusion lines, monthly capacity: 3000 tons
2 Powder coating lines
1 Anodizing line
Some info we need to know:
1. The size of the solar panel: L: ______ mm, W: ______ mm, T: _____ mm
Frame ____, or Frameless _____ .
Panels array style: Horizontal ______ or Column ______
2. How many panels you are going to mount?
3. Wind load _____ m/s; Snow load ______ Kn/cm2
4. The installation angel _____ Degree
5. Style of the foundation:
Ground mounting ____
Garden mounting ____
Balcony mounting ____
Roof mounting _____
Wall mounting ____
6. What kind of roof do you have?_______(Tin / metal / tile / slate / shingle roof / flat roof)
Fixed solution: Hook, L foot, Clamp, ballast or tripod?
Purtin span ____ mm
Roof sheeting cross section drawing or photo
7. Do you have any special requirement on ground/flat roof clearance?
Structure type: Common ground___ , Carport ___ , or solar farm ___ .
Foundation: Concrete ____, Ground screw ____ , C pile ____ or U pile ____
){kind=link}