| Customization: | Available |
|---|---|
| Certification: | ISO |
| Application: | Commercial |
|
Still deciding? Get samples of US$ 1.9/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
End Clamp Solar Mounting Components is a must for fastening the pv modules on the mounting system. The advantage of sideclamps as the following:
Easy installation. Need only a Hexagonal wrench or Allen wrench to turn on till tight.
Versatility: Mid clamp as solar mounting components can be many different shapes, sizes or different materials according the specific need of a pv racking system. But ALV'S standard mid clamps are 6005 T5 aluminum alloy and stainless steel.
Service durability: As the mention above, Alv's side clamps made of high quality aluminum alloy and SS304. They are all materials good at corrosion resistance to endure extreme weather conditions and last decades of years.
Scientific : The main function of end clamps is to keep the solar panel from moving on the mounting rack even under fast wind and heavy snow lord pressure.
Compatibility: Alv's end clamp compatible to most branded solar panels and most kind of mounting system.
| Application | Pitch Roof/Flat roof/Ground/Floating |
| Modules Layout | According to Requirements |
| Wind Load | Up to 60m/s |
| Snow Load | 1.4KN/M² |
| Module Inclination | 0-45° |
| Building Height | Up to 20m |
| Standards | JIS 8955:2017/DIN1055/ASCE_ 7-05/AS-NZS 1170 |
| Warranty | 10 Years |
| Color | Natural |
1 Mounting rails: Start by installing the mounting rails on the roof or ground-based structure where the solar panels will be placed. These rails serve as the foundation for attaching the panels. Ensure that the rails are properly aligned and securely fastened to the surface.
2 Positioning the panels: Place the solar panels onto the mounting rails, aligning them according to the desired layout and orientation. Leave a small gap between each panel to allow for expansion and contraction due to temperature changes.
3 End clamp placement: Once the panels are positioned, you will need to install the end clamps. End clamps typically consist of two pieces: a top clamp and a bottom clamp. The top clamp is placed on the upper edge of the panel, while the bottom clamp is placed on the lower edge.
4 Adjusting the end clamps: Adjust the end clamps to fit the thickness of the solar panel. Most end clamps have adjustable settings to accommodate panels of different sizes. Use a wrench or screwdriver to tighten the clamps securely around the edges of the panels.
5 Secure the end clamps to the mounting rails: After adjusting the end clamps, fasten them to the mounting rails using the provided hardware, such as bolts or screws. Make sure the clamps are tightly secured to prevent any movement or slippage.
6 Repeat for remaining panels: Repeat the above steps for each solar panel in the array, ensuring that they are properly aligned and securely fastened using end clamps.
7 Wiring and electrical connections: Once all the panels are installed, proceed with the wiring and electrical connections. Connect the panels in series or parallel, depending on your system design. Follow the manufacturer's instructions or consult with a professional electrician to ensure proper wiring and connection procedures.
End Clamp Solar Mounting Components is a small in size but very important for building a solar racking system. It is the Mid clamp that keeps the panels tightly on the racking system at the right position. It also avoid the sliding or moving even though the paels pressuring by the strongest wind and heavy snow load. The numbers of using clamps usually depend on the tilt degree.
Side clamp as a solar mounting component can be designed and produced in many sizes and shapes at ALV'S factories. Aluminum alloy 6005 and stainless steel 304 are the right choices. In order to decrease the cost close to the required limitation, our engineers will figure out the reasonable thickness and structure for each individual project. Though it does not matter a lot comparing to the whole power plant investment, we still desire to care the details.
Side clamp taking the advantage of easy operation, a hexagonal or an Allen wrench will handle well. Its service life will be a great number of decades for sure while needing a little bit of maintenance there.
Every set of end clamp from ALV is tested before shipment. You will find them moving smoothly and fix the panels strongly .
At the same time alv's factory will be very please to provide the related earthly plugs, wire brackets and other accessories.
1. Experienced: ALV has years of experience in the generation and sales of solar tile roof hooks, understands the market and customer needs, and can provide professional advice on solar tile roof hooks to help you find the most suitable product for your needs
2. High quality products: Made of high-quality SS304 stainless steel material using the most advanced technology and design today, they have durability and stability, and can withstand various climate tests.
3. Reasonable Price: After market research and comparison, our solar tile roof hook price provides customers with the most cost-effective solution while ensuring product quality and service. We can also provide customized services according to customers' specific needs.
4. Professional service: We have a comprehensive after-sales service team, and customers who cooperate with us will have VIP exclusive customer service to provide comprehensive services, including technical consultation, product installation, maintenance, etc
5. After sales guarantee: All products have undergone safety testing and certification, and provide product quality, guarantee, and maintenance, so that you can purchase without worry.
Global sales network: Our company's sales network covers the world, and our products and services have entered many countries and regions, such as the United States, Europe, Australia, Asia, etc., receiving widespread recognition and praise from customers.
1 What sizes of panels that end Clamp Solar Mounting Components can cover?
ALV'S end clamps can hold most of the pv modules in market. Anyway, the size and shape of a side clamp can be tailor made according to the specific requirements in case there is any.
2 What kind of tools needed for installing a side clamp?
Usually, an Allen wrench or hexagonal wrench will do. Some special Integrated locking mechanism clamps need individual locked gasket or nuts.
3 Does the side clamp good for all the solar panels?
End clamp has the adjustable feature to suit most of solar panels . Anyway, we suggest you find the best instead of good, so it is necessary to consider of choosing the right size and the right material, especially you are using the unusual panels. In most cases, you need to consider the direction of the panels layout and the supporting structure at the same time.
4 How many years will the clamp in a normal usage?
As you can see the clamp made of durable materials. Its service life is much longer than the cells' for sure.
5 Is the clamp reusable or recyclable ?
Yes, it can be reused and recycled . They are made by eco-friendly materials. So it is a waste to dispatch the used clamps directly to the waste center. It can be sold for money! However we do not recommend to use the old clamps for any new solar project.
){kind=link}